E-liquid, otherwise known as ‘vape liquid’ or ‘vape juice’, is the fluid used in vape kits and electronic cigarettes to create flavoured vapour.
E liquids are made from 3 main ingredients; vegetable glycerine, propylene glycol and flavourings. Most e liquids also contain nicotine, however there are plenty of flavours of vape juice that have nicotine free options.
There are quite a few ‘types’ of e liquid, but they generally all fall into a few main categories. If you’re new to vaping, it’s a good idea to know what these are so that you can choose the correct type for your vape kit or e-cigarette. Find out more about these below.
All e liquids contain a ratio of two important ingredients. These are VG (vegetable glycerin) and PG (propylene glycol). VG is a thicker substance whereas PG is thinner. Different ratios of these ingredients will affect the viscosity of the vape liquid and therefore which types of device they will be most suitable for. They also have an effect on the vapour and ‘throat hit’ that an e liquid will produce:
Most e liquid bottles will indicate what ratio of PG and VG ingredients they contain. You can use this information to work out what type of vape experience you will get and which devices they will be suitable for.
These will be suitable for kits and coils with less than 1 ohm resistance. These coils are usually provided for vape kits designed for ‘sub ohm’ or ‘DTL’ vaping.
These will be suitable for kits and coils with more than 1 ohm resistance. These coils are usually provided with e-cigarettes designed for ‘classic’ or ‘MTL’ vaping.
50/50 vape liquid will be suitable for use with most kits, tanks and coils. However, if your coil’s resistance is below 0.4 ohm, we would recommend opting for a higher VG e liquid.
The quickest and easiest way to do this is to look at the coils for your device. Replaceable coils will always have the ohm rating printed on them. Check the metal casing and look for the ohm rating, then refer to the guidelines above to find out if you should use a higher PG or higher VG e liquid.
As above, as long as the ohm rating isn’t super low, a safe bet is to go for a balanced 50% e liquid.
As a general rule, consider choosing an e-liquid with 3mg of nicotine if you only smoke one or two cigarettes a day, 6mg if you smoke under 10 per day and want a little bit of throat hit, 12mg if you smoke up to and above 20 a day and18mg if you are a heavier smoker.
There are also e liquids available without any nicotine. However, if you are trying to give up cigarettes, you may want to start with an e-liquid that helps you with cravings in the first few weeks or months after you have stopped smoking.
50/50 e-liquids offer the best of both worlds, with a balanced ratio of PG and VG.
In recent years, this ratio has become increasingly popular due to it’s versatility. The 50% PG/50% VG blend makes these e-liquids suitable for use in the majority of vape kits or pod vapes and offer a perfect balance of flavour and vapour production.
If you are new to vaping, we would recommend going with a familiar flavour to make the switch as smooth as possible. There are a wide variety of different Tobacco and Menthol flavours available that are perfect for smokers transitioning to vaping.
However, if you fancy trying something a little different, there is a whole world of flavours out there. Opt for fresh, fruity flavours or complex flavours designed to replicate sweets, drinks or even deserts.
If you have enjoyed reading this blog, why not share it with your vaping friends?
Discover relaxation and Joy, pick and smoke Woomi vape.
If you’re interested, find out more about the Woomi Vape e-cigarettes devices here.
Copyright © 2012-2022 Hong Kong Showintop Limited. All Rights Reserved.